Safety Harnesses Archive

This fits your .
• Make sure this fits by entering your model number.
• Helps prevent the effects of suspension trauma after a fall by allowing vicitim to stand up in their harness
• Allows the worker to relieve the pressure being applied to the arteries and veins around the top of the legs
• Attaches to most harness sizes, styles and brands right in the field within just minutes
• Simply choke the trauma pack around the harness web at the hip and the system is ready
• Suspension trauma safety straps, one pair, attaches to most harnesses

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Built entirely out of Cordura nylon.
• Cargo pocket, two side mount pockets and elastic keeper.
• Cargo Pocket measures: 7.75″ Tall x 5.75″ Wide x 4″ Deep at the top, tapering down at the bottom.
• Penlight, radio, and trauma shears not included.

This fits your .
• Make sure this fits by entering your model number.
• Side D rings ,compact,lightweight and portable design : Easy to wear and adjust . protect belt will hold and sustain you at a specific work location such as rebar tying, tower maintenance , wall-form work safety harness ,ladder work belt , trees climbing harness etc
• Durable polyester construction protective harness ,High tensile strength ,abrasion resistance ,low friction coefficient
• Fit for the waist 31″ – 56″ , your family can use same body belt , safety escape equipment for household prepared
• Weight limited:200KG ,breaking strength 22KN，width of the belt :4.2 cm ；waist support ：13x60x0.9 cm (5.2 x 24x 0.36 inch )
• Air permeability waist belt ,sweat-absorbent and comfortable

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Meets ANSI Z359.1-2007, ANSI A10.32-12
• OSHA 1926 Subpart M, OSHA 1910
• Worker Capacity Range: 130-310 lbs.
• Break Away Lanyard Keepers
• Fall Indicator

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• LARGE POLYESTER WEBBING : This Full Body Harnesses are constructed with 1¾ inch (44 mm) polyester webbing
• 3-D RINGS FOR MORE DAFETY: 1 Dorsal (back) D-ring to the Full Body Harnesses is for fall arrest or restraint systems. 2 Hip D-rings are used for positioning and restraint systems.
• UNIVERSAL SIZE FULL BODY HARNESS: individually sized Full Body Harnesses smaller than XL are designed for users with a maximum capacity up to 310 pounds (141 kg) including clothing, tools, etc.
• DESIGN FOR COMFORT AND SAFETY: This Full Body Harness is designed to be used as part of a personal fall arrest, controlled descent, restraint, rescue, ladder climbing, or work positioning system.
• LIGHTWEIGHT AND ECONOMICAL: Fall arrest harness, this harness delivers quality construction designed for general fall arrest applications.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• WELKFORDER Body Belt is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. Applied to Construction, Roofing, Camping, Window cleaning, and Surveyor etc which should be composed of an anchorage and a Full Body Harness (FBH), with a Shock Absorbing Lanyard, or a Self‐Retracting Device. Complies with OSHA 1926.502 and ANSI Z359.3‐2007 when integrated into a full body harness.
• WELKFORDER Body Belt has a waist pad made of EVA foam bonded with air mesh and non-woven fabric which is light and portable, shapable and breathable, with high quality. The waist pad is ergonomic designed of size 30” long, 6.1”wide in the middle and 2.76”wide at sides. Provides comfort, flexibility and compact support for hours working.
• WELKFORDER Body Belt has two Plated Sides D-Ring with Min. Breaking strength 5000lbs/22KN, corrosion resistant, Compliant with ANSI/ASSE Z359.12-2009 provide premium safety. The Sides D-ring should be connected with a compatible connector as a work positioning system. DO NOT use the side D‐rings in a fall arrest application.
• WELKFORDER Body Belt Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All belts and stitching patterns were inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
• WELKFORDER Body Belt has a waist belt equipped with seven grommeted holes and a yellow zinc plated tongue buckle for fast adjustment and fastening. Ensure the buckle is properly secured, with the tongue in one of the grommeted holes. The body belt should be comfortably snug for waist fitting size 32” to 46”.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Quick adjust torso buckles
• Five points of adjustment
• Stretch ability in the shoulders and back
• Two lanyard keepers
• Tongue buckle leg straps and side D-rings

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Quick adjust torso buckles
• Five points of adjustment
• Stretch ability in the shoulders and back
• Two lanyard keepers
• Tongue buckle leg straps

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• ANSI/ ASSE Z359.11-2014 Certified by UL and OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 Certified by UL and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
• ERGONOMIC DESIGN FOR PROPER FIT: The combination of “No-loose-ends” shoulders straps, legs straps and chest strap design with Pass-Thru Premium quality alloy steel mating buckles helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). It’s General Size great for construction workers, carpenters, painters, roofers, window cleaners etc.
• SAFETY DESIGN PERFORMANCE: WELKFORDER Full Body Harness WFH001 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
• HARDWARE COMPONENTS QUALITY ASSURED: WELKFORDER Full Body Harness WFH001 has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-ring for better work position only. Five Adjusting mating buckles with stamping steel material of Min. Breaking strength 4000lbs/18KN on adjusting straps for superior fit provides both premium comfort and safety.
• WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Full Body Harness is lightweight with webbing of tangle free to help keep you comfortable. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 27KN/6000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• ■ Premium quality steel buckles reduce both the carried weight and required energy required for all-day job performance. Three high quality steel D-rings: at back and hips. Five points of adjustment. Notched pass through chest buckles fasten without twisting
• ■ Polyester webbing strap with powder coated steel metal fittings
• ■ Fully Adjustable Universal Fit for XL and XXL Sizes All in ONE Harness
• ■ Multi-Pur​​​pose Harnesses include rear D-rings and are ideal for use as a general harness tool in a variety of applications, it’s and ideal tools for roofing, ladder climbing, construction site worker, warehouse forklift cage work, and for ironworker.
• ■ Restraint rope lanyard 1.0 mtr length, abrasion resistant thimble to protect the loops from being damaged by metallic contact and the steel scaffold hook made from high forged alloy steel material with gate opening 55 mm.

› See more product details