Safety Harnesses Archive

This fits your .
• Make sure this fits by entering your model number.
• polyester 100%
• Made in the USA and Imported
• Employees can personalize their harnesses without jeopardizing the integrity of the webbing
• Fully adjustable shoulder, chest strap & leg straps
• Easy adjustment combination buckles
• Unique aesthetic stitch pattern for enhanced strength

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness with Back Support supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
• REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness with Back Support has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps & around the thighs bringing you to an upright position with a slight frontal with some pressure may occur on the lower chest.
• SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness with Back Support is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
• ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
• OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Meets ANSI Z359.1-2007, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• ANSI Worker Capacity Range: 130-310 lbs.
• X-Pad Pre-Installed
• Tongue Buckle Legs

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• 5 points of adjustment
• Premium Edge Series Harnesses were awarded an International Design Excellence Award in 2007
• Closed Cell foam padded waist belt
• Side positioning D-rings
• Slide on tool belt included

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harnesses support users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
• REDUCE THE FEAR FACTOR: Our KwikSafety 1D Industrial Full Body Harnesses have one (1) Dorsal Ring that is located on the back of the Harness and is the primary fall arrester attachment. It can also be used for travel restraint and rescue. During a fall, our FBH directs the load through the shoulder straps and around the thighs. If a fall were to occur, the FBH will bring you to an upright position with a slight lean to the front. Some pressure may occur on the lower chest.
• SAFETY DESIGN REQUIREMENTS: If a fall were to occur, we want to ensure your safety by designing safe and secure full body harnesses. The load bearing straps of our 1D Full Body Harnesses are made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent, if not superior, to polyester. It is lock stitched and securely back stitched together.
• ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab, and the duties/responsibilities of the manufacturer and testing lab. View the Compliance Label/ Safety Label for more information.
• OSHA APPROVED: The Occupational Safety & Health Administration (OSHA) was created to ensure safe and healthful working conditions for men and women by setting standards. Per OSHA, a personal fall arrest system is required when working 6 ft. or more above lower levels and usually consists of a full body harness, a declaration device, a lanyard, and an anchor point.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety Full Body Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
• REDUCE THE FEAR FACTOR: Our KwikSafety 3D Industrial Full Body Harness has one (1) Dorsal Ring that is located on the back of the Harness and two (2) on the hip for work positioning purposes only. The Dorsal Ring is primary used for fall arrest & also used for restraint & rescue. During a fall, the load is directed through the shoulder straps and around the thighs bringing you to an upright position with a slight lean to the front with some pressure may occur on the lower chest.
• SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing straps of our 3D Full Body Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
• ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
• OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Built-in shoulder, back and leg comfort padding
• Back D-ring
• Quick connect chest and leg straps
• Soft, lightweight webbing
• Back D-ring, belt with pad and side D-rings, quick connect buckle leg straps, built-in comfort padding (size Medium)
• ExoFit harness is the first of a new generation of harnesses designed from the ground up for maximum comfort and performance
• State-of-the-art 3-D mesh lining wicks moisture keeping you cool and delivering all-day comfort

This fits your .
• Make sure this fits by entering your model number.
• Meets ANSI Z359.1-2007, ANSI A10.32-12
• Compliant with OSHA 1926 Subpart M, OSHA 1910
• Worker Capacity Range: 130-310 lbs
• Break Away Lanyard Keepers
• Fall Indicator

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• Meets ANSI Z359.11-2014, ANSI A10.32-12

› See more product details

This fits your .
• Make sure this fits by entering your model number.
• HYBRID SHOULDER, BACK AND LEG COMFORT PADDING: Lightweight, moisture wicking and breathable padding with soft edging wraps around the wearer for the ultimate in comfort, security and no-tangle donning.
• BODY BELT/HIP PAD WITH TECH-LITE ALUMINUM SIDE D-RINGS: Provides hip D-rings ideal for positioning, additional back lumbar support and tool carrying options.
• DUO-LOK QUICK CONNECT CHEST AND LEG STRAPS: Lightweight one-handed use with memory fit web-lock ensures fast, non-slipping connections.
• IMPACT INDICATOR: Rip-stitch indicators allow you to inspect the harness at a glance, for prior damaging impact loads.
• INTEGRATED TRAUMA STRAPS: Provide an adjustable, continuous loop for post fall, minimizing suspension trauma.
• BUILT IN REFLECTIVE MATERIALS: Integrated on legs, chest, shoulders and back for enchanced visibility in low light conditions.
• Hybrid shoulder, back, leg and hip padding with premium comfort and durability